1. The fast-recovering TM tip can be installed in the whole series of models for the future trend of “lead-free soldering”. The high-precision thermocouple is located at the forefront of the soldering iron. Therefore, it is possible to sense subtle changes in the temperature at the tip of the tip.
· 300 degrees C in six seconds.
· The card-designed tip is quick to change and easy to use.
· Variety of soldering irons to quickly solve difficult soldering processes.
2, anti-tin explosion delivery tin ZSB (Geyan) can be installed in a full range of models
At the same time of precision tin feeding, the knife-shaped gear protrudes on the side of the tin wire to prevent the flux from oozing out, so that the flux does not boil during the soldering process.
And the "tin explosion" is produced to ensure the cleaning of the soldering parts, and there is no solder ball or tin ball generated by the tin explosion to affect other PCB boards.
Sensitive parts.
3. RSP/RSL soldering iron group with auxiliary tin feeding function
RSP and RSL are designed for automatic soldering.
The feeding position of the secondary tin feeding of the tip of the soldering iron can be adjusted by adjusting the upper and lower positions of the positioning parts. The first section of the tin can be used to make the tip or weld
Pre-bonding tin to the joint allows the welding results to be faster and more perfect.
4. Card type soldering iron group capable of directly blowing nitrogen
The nitrogen nozzle is integrated with the soldering iron tip, and the nitrogen after the preheating can be blown out from the tip of the soldering iron tip, and the process requirement can be achieved with a small amount of nitrogen.